October 29, 2026

Track the amp, lens, NFC and David’s wireless series as source under kernel r180 and CI15349, with running-phone acceptance separate. Preserve stock 10W capability and the unfinished mode-aware current and protection work.

Core placement through cpuset/uclamp and the power_allocator target follow the state machine.

Tasks retire into the SAF one at a time; Gitea issues carry remaining work only. Work lands on the default branch.

The modem EFS server becomes a declared blueline package. It joins the profile so new images carry it.

The manifest still listed a file 489291f removed, which stopped candidate preparation.

Setup now travels inside the payload it verifies, and CI inspects that pairing. Native install has not run yet.

The stored process columns gained path_assessment, and the ownership dialog now checks each unknown field by label.

Keep intent distinct from protection and leave installed state alone during checkoff.

Same rule as SouveraineOS ee30512: no task or archive branches.

Their icon property overrode the button's final one, so the whole shell failed to load. The shell also declares the positioning module its weather service imports.

Build CHARGER_P9221 and require its module in the signed candidate. Kernel b2e682d also carries DCIN, board calibration and receiver lifetime repairs.

Select LC89821X and require the lens, amplifier and NFC modules in the kernel package. Kernel blueline 38c1cb1 carries the reviewed 7.1.1 backports.

The smoo, usb-signaller and gadget network recipes now come from the pinned souveraine-usb revision. That pin also moves smoo to rc8.

The plain Makefile build had no sysroot include path, so libqrtr.h was missing. It now uses the declared sysroot like the other cross builds.

The host route now ranks after wifi and LTE, and the DHCP server no longer offers the phone as a router. NetworkManager's gadget exclusion ships here too.

rmtfs 1.3 now builds from its pinned Debian source with the read-write EFS unit. It and tqftpserv ship their units and boot links instead of overlay copies.

The recipe follows linux-blueline's default branch again, which now carries the cs40l20 haptics, combined health flags and four upstream qcom_smbx fixes.

Cancel receiver work before unregistering its supply, serialize command-register access with IRQ handling, and freeze periodic pad checks across suspend.

Backport Linux a2d7dc538da2 by Robin Snyders: probe failures roll back the charging state, and float voltages outside 3.4875-4.92 V are rejected.

Backport Linux 2f0dec120078 by Robin Snyders: the bark handler wrote BARK_BITE_WDOG_PET as an absolute address instead of the charger's own register.

Backport Linux 2548e4fa576a by Robin Snyders: the both-edge bat-ov IRQ notifies on every edge, so recovery reaches userspace. Read failures are reported.

Backport Linux 2a26d260e72a by Robin Snyders: selector 0 is 3.4875 V, so 4.4 V was set one step high. The voltage_max getter and setter share that encoding.

smoo, usb-signaller and the blueline gadget network now live with their component. smoo moves to rc8; its gadget and protocol code match the old pin.